Cove Moulding 2-3/8" - 2

This delightful cove molding 2-3/8" - 2 measures 2.386" width by .750" thickness allowing the use of four quarter lumber for milling sprung (laying horizontally flat) on a commercial-grade molder. The lovely symmetrical profile contains a 1-1/64" radius cavetto in the center, flanked by a 17/32" vertical fillet above and a 17/32" broad fillet on the bottom right side of the design. The distance between the two high points of the pattern is 1-5/8" across. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 1-11/16" tall with a projection of 1-11/16" across the top.

Looking for that special molding to enhance the architectural style of your current project? Please send us a sketch; custom profile design is our specialty. Experience the elegant beauty we can create; from your outlined idea concepts and our vast knowledge of the woodworking industry.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements; please enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.375" / Depth of Cut = .457" (top knives).

Thickness = .750" / Depth of Cut = .386" (right blades) & .386" (left cutters).