WM 84 Cove 2-1/4" - 4

This 2-1/4" - 4 WM 84 cove mould measures 2.250" in width by .563" in thickness. The asymmetrical terminating profile consists of a 15/32" vertical fillet on the top left. It attaches to a 1-1/2" radius cavetto in the center, connected to an 11/32" broad line segment in the bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 1-21/32" tall with a 1-17/32" projection across the top. The recommended rough wood rip size for milling sprung (laying horizontally flat) using four-quarter lumber is 2-1/2" wide.

Looking for a unique pattern to enhance the architectural style of your current project? Please send us a sketch; custom profile design is our specialty. Experience the elegant beauty we can create from your outlined idea concepts and our vast knowledge of the woodworking industry.

The current combined high-speed steel knife & profile template prices are listed below for quoting purposes. You may only need blades for a specific cutter head on the itemized costs, saving money by employing knives you already own. Most of our crown designs utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of patterns.