Cove Mould 2" - 2

This small 2" - 2 cove mould measures 2.000" wide by .687" thickness. The symmetrical profile is comprised of a 1-9/32" radius cavetto in the center flanked by a 3/16" tall vertical area on the top left with a 3/16" broad horizontal segment at the bottom right corner of the pattern. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific back angle positions lock the installed height at 1-27/64" tall with a 1-27/64" projection across the top. The pattern measures 2.000" in width by .687" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 2-1/4" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.