Cove Moulding 1-15/16"

This small cove molding 1-15/16" measures 1.937" width by .562" tall, allowing the use of four quarter lumber for machining on a commercial molder. The symmetrical pattern contains a 1/4" tall line segment on the top left. The line connects to a 1-3/8" concave semicircle in the center, with a 1/4" wide flat line on the design's bottom right side. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 1-3/8" tall with a projection of 1-3/8" across the top.

Looking for that special molding to enhance the architectural style of your current woodworking project? Please send us a sketch; custom profile design is our specialty. Experience the elegant beauty we can create; from your outlined idea concepts and our vast knowledge of the woodworking industry.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.937" / Depth of Cut = .239" (top knives).

Thickness = .562" / Depth of Cut = .397" (right blades) & .397" (left cutters).