Cove Moulding 1-3/4" - 5

This dainty cove moulding 1-3/4" - 5 measures 1.750" wide by .437" thickness, allowing the detail to be milled sprung (laying horizontally flat) out of four quarter lumber. The symmetrical profile is comprised of a 1-3/32" radius cove in the center, flanked by a 11/32" tall vertical line segment on top and a 11/32" wide horizontal line at the bottom of the design. The spring angles are fixed at forty-five degrees, these explicit back bevels keep the inner profile parallel to the wall and ceiling as well as set the installed height at 1-1/4" tall with a projection of 1-1/4" wide.

Utilize any of our patterns to create a stylish moulding catalog for your millwork company, or, simply connect our profile catalog to your website, this will enable you to offer more eye-catching profiles to your clients while reducing production cost spent on molding design. Let us help you in the transformation of that beautiful house being constructed into an elegant home.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.750" / Depth of Cut = .323" (top knives.)

Thickness = .437" / Depth of Cut = .207" (right blades) & .207" (left cutters.)