Cove Moulding 1-11/16" - 1

This symmetrical cove molding 1-11/16" - 1 measure 1.687" width by .750" thickness, requiring the use of a 2-1/16" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial-grade molder. The simplistic profile contains a 57/64" radius cavetto in the center, flanked by a 1/4" vertical in the upper left and a 1/4" horizontal line in the lower right side of the design. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 1-3/16" tall with a projection of 1-3/16" across the top.

Looking for that special molding to enhance the architectural style of your current project? Please send us a sketch; custom profile design is our specialty. Experience the elegant beauty we can create; from your outlined idea concepts and our vast knowledge of the woodworking industry.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.687" / Depth of Cut = .294" (top knives).

Thickness = .750" / Depth of Cut = .590" (right blades) & .590" (left cutters).