Cornice 2-1/4" - 11

This traditional 2-1/4" - 11 cornice pattern measures 2.250" wide by 1.125" thickness, allowing the detail to be milled from either five or six-quarter lumber. The decorative profile is composed of a 1-1/32" broad line segment on the top left, attached to a 1/4" wide congee made from a 1/8" concave semicircle with a 1/8" vertical drop in elevation in the center. It's connected to a two tangent radius cyma reversa, leaving a 9/32" thickness dimension on the right side of the design.

Try one of our 125% concentration ultimate CBN grinding wheels. Finish grinding at 3000 rpm with a twenty-degree back clearance angle will create a superior micro edge on all your high-speed steel profile knives. Read this article or watch the videos to help better understand how to align a borazon wheel to axial constant on a Weinig R960 profile grinder.

The present-day combined high-speed steel knives & template prices are listed below for quoting purposes.