Door/Window Casing 2-3/4" - 48

This elegant 2-3/4" - 48 door/window casing comprises a 21/32" broad flat section on the top left. It connects to a 1-23/64" wide cong'e derived from a 5/32" concave semicircle with a 1/16" rolled edge in the center. Attached to a 23/64" flat area with a 13/64" round over joined to a perpendicular step with a 1/16" convex bead and a slight taper on the design's right edge. The beautiful profile measures 2.750" in width by .812" in thickness. The recommended rough wood rip size using four-quarter lumber is 3" wide. The outer left edge was intentionally left square for the use of many of our lovely backband patterns; here's one you may want to review and consider, backband 1.031"

Read our commentary on custom-made pressure shoes. This easy-to-understand step-by-step article will help you mill this profile to perfection. Whether you own a Weinig, Wadkin, Leadermac, SCM, Diehl, or Homag moulder, our patterns will mill flawlessly; you may also want to try an inverted profile for holding down the workpiece on beveled designs. Just one more example of how we help you produce superior milled profiles that will influence even the toughest critics.

The up-to-date combined high-speed steel knives & template prices are listed below for quoting purposes.