58 Degree Back Bevel Cutter - 2

This 58-degree - 2 back bevel cutter is designed to cut a fifty-eight-degree undercut on the right vertical cutter head on an industrial moulder while milling a piece of crown, cove or bed mould. These knives create half the determining factor of the final height and projection of any of the above mentioned profiles when installed, the other half of the equation is generally a degree that combined equals ninety. On this back cut layout in the image above, the maximum depth of cut is 1.281", and the maximum height of cut is .800". Every crown, cove, or bed pattern we design has height numbers near the degree of angle on the layout paperwork we supply. That number must be smaller than the height number above, in this example, .800", for this knife to be able to cut the entire height of the slope while milling; if not, please select a different size angle of the same degree. We deliberately design all our crown, cove, and bed moldings with forty-five-degree angles and under to be milled on the right vertical cutter head, and all forty-five-degree and higher back bevels be milled on the left vertical cutter head. Our custom design practices will save you thousands of dollars in manufacturing costs over the years.