30 Degree Back Bevel Cutter - 1

This 30-degree back bevel cutter - 1 is designed for milling a thirty-degree chamfer (referenced off the inside fixed fence on the molder) on the backside of a piece of bed, crown, or cove moulding. In this layout design, the maximum depth of the cut maxes out at .379", and the full height of the cut is fixed at .657". All sprung molding designs have a height of cut numbers near the edge of the degree on all the paperwork we provide. That number must be smaller than the height number in the image above, in this case, .657" for this knife to be able to mill the entire height while machining; if not, select another size angle that is suitable for your application.

Try one of our 125% concentration ultimate CBN (cubic boron nitride) grinding wheels, finish grinding at 3000 rpm with a twenty-degree back clearance angle will create a superior micro edge on all your high-speed steel profile knives. Read this article or watch the videos to help better understand how to align a borazon wheel to axial constant position on a Weinig R 960 profile grinder. During the machining process, the knives will be capable of milling some of the finest quality architectural moldings you have ever produced.