Bed Mould 5-5/8"

This classic bed mould retains typical characteristics as most of these trim pieces. The supporting profile maintains a 2-3/32" convex arc on the top left. It connects to a 25/64" vertical segment in the center and a 1-7/8" concave semicircle with a 5/16" broad flat line on the design's bottom right corner. The spring angles are fixed at moulding-catalog/bevels-chamfers/bevel-40-deg">forty and fifty degrees, these precise back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the height position at 4" tall with a 4" projection across the top. The lovely pattern measures 5.625" in width by 1.062" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using five-quarter lumber is 5-7/8" wide.

The active combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our bed mould designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of patterns.