Bed Mould 2" - 2

This standard bed mould 2" - 2 measures 2.000" wide by .750" thickness, authorizing the pattern to be milled sprung (laying horizontally flat) out of four-quarter lumber. The traditional supporting profile is comprised of a 3/4" radius convex semicircular arc on the top left, connected to a 1/4" tall vertical line segment in the center, joined to a 17/32" cove with a 13/64" wide horizontal line on the bottom right side of the design. The spring angles are fixed at forty-five degrees, these clear back bevels keep the face side of the profile parallel to the wall and ceiling when installed, they also lock in the positioned height at 1-1/2" tall with a projection of 1-3/8" wide.