Bed Mould 1-3/4" - 7

This bed mould 1-3/4" - 7 measures 1.750" wide by .750" thick. The supporting profile comprises a 35/64" radius quarter circle on the top left. It's connected to a 1/4" vertical segment in the middle, attached to a 21/64" radius cove with a 3/16" flat section on the bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 1-25/64" tall with a 1-1/8" projection across the top. The pattern measures 1.750" in width by .750" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 2" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.