Bed Mould 1-5/8" - 3

This classic 1-5/8" - 3 supporting bed mould comprises a 17/32 quarter-round on the top left. It joins a 3/16"vertical segment in the center with a 13/32 cavetto and an 11/64" flat area on the bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 1-3/16" tall with a 1-1/8" projection across the top. The pattern measures 1.636" in width by .562" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 1-7/8" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.