Bed Mould 1-5/8" - 1

This supporting 1-5/8" - 1 bed mould utilizes a 31/64" quarter-round bead on the top left. It's attached to a 7/32 vertical segment in the center and a 15/32"cove merged with a 3/16" flat section at the bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 1-1/4" tall with a 1-1/16" projection across the top. The pattern measures 1.625" in width by .625" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 1-7/8" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.