Bed Mould 1-5/8"

This 1-5/8" supporting bed mould consists of a 1/2" radius quarter-round bead on the top left. It connects to a 1/8" vertical section in the middle with a 3/8" cavetto and an 11/64" flat area on the bottom right corner of the design. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 1-1/8" tall with a 1-3/16" projection across the top. The pattern measures 1.625" in width by .625" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 1-7/8" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.