Base Cap 1-1/2" - 11
Base Cap 1-1/2" - 11
This traditional base cap 1-1/2" - 11 measures 1.500" wide by .687" thickness, permitting the detail to be cut out of four-quarter lumber. The decorative profile is composed of a 3/16" broad line segment at a 1/2" thickness dimension on the left, this creates a quirk when applied to a piece of S4S (surfaced four sides) lumber, attached to a graceful two tangent radius cyma reversa in the center, joined to a 7/32" wide half round bead and a 3/32" wide flat line that transitions into a 1/8" cove leaving a 5/32" thickness dimension on the right side of the design.
Moulding Knife Calculator
Grade of Steel
Subtotal
+ Custom Moulding Template
Total (Template + 2 Knives)
V2+RW
chrome coated 72rc face, best seller,
great tool life
$0.00
$0.00
$0.00
Black Nitride
black nitride case hardened
72rc, medium size runs
$0.00
$0.00
$0.00
Endurance
chrome and diamond coated, longest
tool life
$0.00
$0.00
$0.00
Note: If you’re experiencing trouble printing to Full Scale, Go to File,
Print Preview. Change the “Shrink to Fit” option to 100%
Right Cutter Head
Thickness: 0.000
Depth of Cut: 0.000
Left Cutter Head
Thickness: 0.000
Depth of Cut: 0.000
Top Cutter Head
Width: 1.500
Depth of Cut: 0.535
Bottom Cutter Head
Width: 0.000
Depth of Cut: 0.000
Grades of Steel
Price Per Cutter Head - Includes Template & Two Knives
V2+RW
chrome coated 72rc face, best seller
great tool life
Right Cutter Head:
Left Cutter Head:
Top Cutter Head:
Bottom Cutter Head:
Black Nitride
black nitride case hardened 72rc
medium size runs
Right Cutter Head:
Left Cutter Head:
Top Cutter Head:
Bottom Cutter Head:
Endurance
chrome and diamond coated
longest tool life
Right Cutter Head:
Left Cutter Head:
Top Cutter Head:
Bottom Cutter Head:
© Copyright 1997 - 2024 Mirror Reflections Inc. All Rights Reserved.
