Fence Cap 4-11/16"

This rounded top fence cap 4-11/16 measures 4.687" wide by 1.375" thickness, necessitating six or even eight-quarter lumber for milling on industrial machinery. The fashionable profile is composed of a ten-inch radius semicircular arc on the top center, tangent off of two 33/64" rolled edges on the side. The bottom of the pattern can cap a 3-7/16 wide piece of lumber, and it consists of a 3-7/16" wide by 1/4" deep dado with a 5/8" wide flat section and a triangulated drip edge to displace moisture after installation. You may want to review and consider another style of fence cap with a 2-1/2 degree angled top for capping a four-inch wide piece of lumber, fence cap 5.500" - 9.

Need this profile template and a set of knives quickly? We generally can have these cutters ground with any one of our premium quality high-speed steels or carbide and shipped within twenty-four hours. We have artistic profiles from several different architectural eras. There are thousands of compelling designs to help match your creative style.

For knife quoting purposes, click to open the calculator below; we supplied only the important measurements and entered the appropriate dimension in the boxes provided. A brief detailed explanation of how to use the calculator is located here.

Width = 4.687" / Depth of Cut = .906" (top knives) & .250" (bottom cutters).