Backband 1-1/2" - 15

This beveled backband measures 1-1/2" wide by 1-3/8" thickness, allowing the pattern to be machined out of six or eight-quarter lumber. The decorative angled profile is composed of a 1/4" wide line segment with a 3/64" eased outer edge on the top left side, connected to a 21.8-degree beveled line with a 3/64" rounded edge, leaving a 1/8" thickness dimension above the 1/4" wide by 3/4" tall rabbet on the right side. We offer an additional backband in the same width for a 7/8" thickness casing for your review and consideration, backband 1.500" - 3.

Review some of our helpful moulder and knife grinding articles, they will assist you in many aspects of machine set up and knife grinding procedures. These commentaries were written to help you be more familiar with the machinery while making your work a little easier in the process.

For knife quoting purposes, click to open the calculator below; we have added only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation of how to use the calculator is located here.

Width = 1.500" / Depth of Cut = .683" (top knives.)

Thickness = 1.375" / Depth of Cut = .250" (left cutters.)