Backband 1-1/4" - 23

This concave 1-1/4" - 23 backband measures 1.250" wide by 1.250" thickness, with a .125" depth of cut on the left vertical cutterhead and a .633" depth of cut on the top set of knives.

The striking profile is comprised of a 27/64" wide by 1/8" deep radiused edge fillet, attached to a 1/8" wide horizontal line that transitions into a 61/64" radius cove with an eased edge, positioned above the 1/8" wide by 11/16" tall rabbet for the casing to fit into. We have hundreds of unique casing designs this backband pattern would work well with; just input the width of casing that best suits your needs.

Architects, interior designers, lumber mills, and moulding manufacturers have been utilizing our wide variety of creative moulding knife designs for years; we trust you will find that special profile to enhance the architectural style of your home. If you have any questions or concerns about knife grinding procedures for any of our moulding designs, please contact us, we would be honored to assist you.