Architrave/Header 5-1/4" - 9

This creative 5-1/4" - 9 architrave/header measures 5.250" wide by 1.188" thickness, requiring a 5-1/2" wide blank of six-quarter lumber for milling on a commercial molder. The astonishing profile contains a 15/16" wide raised fillet with 1/16" rolled edges and an off-centered v-notch on the top left. It connects two adown-sloping 1/4" radius convex semicircles joined to a 41/64" flat line with another 1/16" round-over attached to two additional 1/4" radius arcs in the center. The remaining section consists of a 2-5/16" broad sunk fillet merged with a 1/16" eased corner and an 11/32" cove that transitions into a 3/8" flat top with a 3/64" eased edge on the design's right side. We offer another profile with similar design characteristics for your review and consideration, architrave 5.250".

Review our commentary on custom made pressure shoes, this helpful step by step article will help you mill this profile to perfection. Did you know we design and grind knives for all the prominent machinery brand names, including Weinig, Leadermac, Homag, Scmi, Diehl, Wadkin, Williams & Hussey, and more? Try our exceptional services; you will be delighted with the results; all the beautiful moldings you manufacture will surely cut above the rest.