Search Our Moulding Knives Catalog by Category and Size
*Enter desired search sizes - use whole numbers & decimals
Crown Moulding 5-7/8" - 1
Crown Moulding 5-7/8" - 1
This stylish crown moulding 5-7/8" - 1 measures 5.875" in width by .750" in thickness, requiring 6-1/8" wide blanks of four-quarter lumber for machining sprung (laying horizontally flat on an industrial moulder. The symmetrical terminating profile comprises a 3-5/16" radius cavetto in the center. Attached to 13/32" tall and wide straight lines flanked by 7/64" canted sunk fillets, connected to an ogee with 25/64" fillets on both the top left and bottom right corners of the design. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 4-5/32" tall with a 4-5/32" projection across the top. We offer a few other sizes in this pattern for your review and consideration, crown 4.250"-15",crown 5.750-13" and crown 5p875".
For knife quoting purposes, click the calculator below; we supplied the important measurements; please insert the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart and place it on the machinery around the shop to help operators save time and increase accuracy during setup procedures.